Wireless Microphone & Line Array Speaker Solution

ADECIA Wireless

A family of products engineered to be installed easily and work together seamlessly, providing unified and customizable communications solutions. The ADECIA Dante-enabled wireless microphone & line array speaker solution satisfies the demand for high-quality wireless audio for office spaces and classrooms. Yamaha's Easy Set Up wizards and automatic technologies simplify implementation, device configuration, and room acoustics by providing all components required for a successful installation, reducing cost, time, and complexities.
Wireless Microphone & Line Array Speaker Solution Use Case 1

Best Audio in Shortest Time:

Yamaha's Set Up Guides automatically detect units, configure components, and optimize audio performance for each room's unique environment - adjusting for echo behavior, reverberation characteristics, speaker/mic position, and more. 
Wireless Microphone & Line Array Speaker Solution Use Case 2

New & Improved Wireless Microphones:

Four modern, modest tabletop microphone types, powered by Li-Ion batteries, allow for 20 hours talk time with 3.5 charge time. Mix & match microphone types for optimal flexibility. Available in Omnidirectional, Directional, Short Gooseneck, and Long Gooseneck.
Wireless Microphone & Line Array Speaker Solution Use Case 3

Latest Technology:

Increased data density leads to increased audio quality. Requires no audio post-processing compute power on the DSP.

Wireless Microphone & Line Array Speaker Solution Use Case 4

Easy Installation:

Devices are connected through one PoE+ network cable, while simple three-step guided set up wizard via web UI automatically configures components. Wireless Access Point Wizard allows users to control up to 8 microphones at a time, pair microphones to chargers, and mute sync if needed.

Specs & Details

RM-WDR: Specifications

Dimensions
Wireless Microphone
Colour
Black
Dimensions (W x D x H)
W 89.0 mm x D 89.0 mm x H 26.0 mm (including rubber feet)
Weight
130 g
Directivity
Unidirectional (Sensitivity: 120°)
Frequency Response
160 Hz - 16 kHz
Sensitivity
-15.4 dBFS/Pa
Power
Rechargable Li-ion Battery 3.6 V 2350 mA/h. For Charge I/F: USB Type C, RM-WCH Charger I/F (4pin)
Maximum Power Consumption
5.0 V 0.7 A
Battery
Talk Time: 20 hours / Standby Time: 7 days / Charge Time: Full charging: 5 hours (80% charging: 3 hours)
In Operation
Temperature: 0°C - 40°C / Humidity: 20% - 85% (no condensation)
In Charging
Temperature: 5°C - 40°C / Humidity: 20% - 85% (no condensation)
Storage
Temperature: -20°C - 60°C / Humidity: 10% - 90% (no condensation)
Indicators
Mic (3 colours) x 1, Battery (3 colours) x 1
Buttons
Mic x 1, Battery x 1, Pair x 1
I/O
USB TypeC (for battery charging) x 1, Charger I/F (4pin) x 1
Accessories
Battery (RM-WBT) x 1, Owner’s Manual x 1
Options
Replacement Battery RM-WBT

RM-WOM: Specifications

Description
Wireless Microphone
Colour
Black
Dimensions (W x D x H)
W 89.0 mm x D 89.0 mm x H 26.0 mm (including rubber feet)
Weight
126 g
Directivity
Omnidirectional (Sensitivity: 360°)
Frequency Response
160 Hz - 16 kHz
Sensitivity
-14 dBFS/Pa
Power
Rechargable Li-ion Battery 3.6 V 2350 mA/h. For Charge I/F: USB Type C, RM-WCH Charger I/F (4pin)
Maximum Power Consumption
5.0 V 0.7 A
Battery
Talk Time: 20 hours / Standby Time: 7 days / Charge Time: Full charging: 5 hours (80% charging: 3 hours)
In Operation
Temperature: 0°C - 40°C / Humidity: 20% - 85% (no condensation)
In Charging
Temperature: 5°C - 40°C / Humidity: 20% - 85% (no condensation)
Storage
Temperature: -20°C - 60°C / Humidity: 10% - 90% (no condensation)
Indicators
Mic (3 colours) x 1, Battery (3 colours) x 1
Buttons
Mic x 4, Battery x 1, Pair x 1
I/O
USB TypeC (for battery charging) x 1, Charger I/F (4pin) x 1
Accessories
Battery (RM-WBT) x 1, Owner’s Manual x 1
Options
Replacement Battery RM-WBT

RM-WGL: Specifications (1)

Description
Wireless Microphone
Colour
Black
Dimensions (W x D x H)
W 89.0 mm x D 89.0 mm x 308.4 mm (including rubber feet and to center of gooseneck mic)
Weight
152 g (including battery)
Directivity
Unidirectional (Sensitivity: 90°)
Frequency Response
160 Hz - 16 kHz
Sensitivity
-20.0 dBFS/Pa
Power
Rechargable Li-ion Battery 3.6 V 2350 mA/h. For Charge I/F: USB Type C, RM-WCH Charger I/F (4pin)
Maximum Power Consumption
5.0 V 0.7 A
Battery
Talk Time: 20 hours / Standby Time: 7 days / Charge Time: Full charging: 5 hours (80% charging: 3 hours)
In Operation
Temperature: 0°C - 40°C / Humidity: 20% - 85% (no condensation)
In Charging
Temperature: 5°C - 40°C / Humidity: 20% - 85% (no condensation)
Storage
Temperature: -20°C - 60°C / Humidity: 10% - 90% (no condensation)
Indicators
Mic (3 colours) x 1, Ring (3 colours) x 1, Battery (3 colours) x 1
Buttons
Mic x 1, Battery x 1, Pair x 1
I/O
USB TypeC (for battery charging) x 1, Charger I/F (4pin) x 1
Accessories
Battery (RM-WBT) x 1, Owner’s Manual x 1
Options
Replacement Battery RM-WBT

RM-WGS: Specifications

Description
Wireless Microphone
Colour
Black
Dimensions (W x D x H)
W 89.0 mm x D 89.0 mm x H 171.2 mm (including rubber feet and to center of gooseneck mic)
Weight
140 g
Directivity
Unidirectional (Sensitivity: 90°)
Frequency Response
160 Hz - 16 kHz
Sensitivity
-20.0 dBFS/Pa
Power
Rechargable Li-ion Battery 3.6 V 2350 mA/h. For Charge I/F: USB Type C, RM-WCH Charger I/F (4pin)
Maximum Power Consumption
5.0 V 0.7 A
Battery
Talk Time: 20 hours / Standby Time: 7 days / Charge Time: Full charging: 5 hours (80% charging: 3 hours)
In Operation
Temperature: 0°C - 40°C / Humidity: 20% - 85% (no condensation)
In Charging
Temperature: 5°C - 40°C / Humidity: 20% - 85% (no condensation)
Storage
Temperature: -20°C - 60°C / Humidity: 10% - 90% (no condensation)
Indicators
Mic (3 colours) x 1, Ring (3 colours) x 1, Battery (3 colours) x 1
Buttons
Mic x 1, Battery x 1, Pair x 1
I/O
USB TypeC (for battery charging) x 1, Charger I/F (4pin) x 1
Accessories
Battery (RM-WBT) x 1, Owner’s Manual x 1
Options
Replacement Battery RM-WBT

RM-WAP-8: Specifications

Description
Microphone Accesspoint
Colour
White (paintable surface)
Dimensions (W x D x H)
W 171.2 mm x D 172.5 mm x H 42.8 mm
Weight
650 g (including mouting bracket)
Power Requirement
IEEE 802.3af (PoE Class 3)
Maximum Power Consumption
48 V 0.2 A
In Operation
Temperature: 0°C - 40°C / Humidity: 20% - 85% (no condensation)
Storage
Temperature: -20°C - 60°C / Humidity: 10% - 90% (no condensation)
Indicators
Power (3 colours) x 1, Status (3 colours) x 1
Buttons
Reset x 1
Connector
RJ-45 (Dante Audio, Dante Control, Remote Control, PoE)
Audio I/O
Dante (1 in / 8 out)
Mount
Wall mount, Ceiling mount (with blacket), Flat placing
Max Device Number with RM-CR
2units (Connection with other than RM-CR is not limited to this device)
Accessories
Owner’s Manual x 1, Mounting bracket x 1 *Screw for Mounting Bracket or Safety Wire are not included

RM-WCH-8: Specifications

Description
Microphone Charger
Colour
Black
Dimensions (W x D x H)
W 304 mm x D 188 mm x H 41.5 mm (including rubber feet)
Weight
800 g
Material
Plastic
Power
DC IN (16 V, 2.4 A)
Maximum Power Consumption
16.0 V 2.0 A
In Operation
Temperature: 0°C - 40°C / Humidity: 20% - 85% (no condensation)
In Charging
Temperature: 5°C - 40°C / Humidity: 20% - 85% (no condensation)
Storage
Temperature: -20°C - 60°C / Humidity: 10% - 90% (no condensation)
Indicators
Activate (3 colours) x 1
Buttons
Activate x 1, Pair x 1
I/O
DC IN x 1
Accessories
Owner’s Manual x 1, AC adapter x 1, Cable x 1 (for Japan and USA), x 3 (for Europe)

RM-WBT: Specifications

Description
Replacement Battery
Colour
Black
Dimensions (W x D x H)
H 11.15 mm x W 34.95 mm x D 52.5 mm
Weight
42 g
Voltage
3.6 V
Nominal Capacity
2350 mA/h
Maximum Charge Current
1.59 A
Maximum Charge Voltage
4.20 V
Maximum Discharge Current
2.30 A
In Operation
Temperature: 0°C - 40°C / Humidity: 20% - 85% (no condensation)
Storage
Temperature: -20°C - 60°C / Humidity: 10% - 90% (no condensation)
Accessories
RM-WBT Safety Brochure x 1

RM-WAP-8: Network Specifications

Ethernet
Dante Audio/Dante Control, Remote Control, Web UI, PoE
Cable Requirements
CAT5e or higher (STP)

Audio Specifications

Frequency Response
160 Hz - 16 kHz
Sampling Rate
48 kHz
Bit Depth
24 bit
Latency
30 ms nominal (w/o signal processing in High Quality mode)
Audio I/O Dante
1 in x 8/16 out
Maximum Input Level of SPL
RM-WDR: 109.4 dB SPL / RM-WOM:108.0 dB SPL / RM-WGL:114.0 dB SPL / RM-WGS:114.0 dB SPL
Self Noise
RM-WDR: 33.3 dBA SPL / RM-WOM: 25.8 dBA SPL / RM-WGL: 36.4 dBA SPL / RM-WGS:36.4 dBA SPL
SNR (Ref. 94 dB SPL at 1 kHz)
RM-WDR: 60.7 dBA / RM-WOM: 68.2 dBA / RM-WGL: 57.6 dBA / RM-WGS: 57.6 dBA
Sensitivity
RM-WDR:-15.4 dBFS/Pa / RM-WOM:-14.0 dBFS/Pa / RM-WGL:-20.0 dBFS/Pa / RM-WGS: -20.0 dBFS/Pa
Dynamic Range
RM-WDR:76.1 dBA / RM-WOM:82.2 dBA / RM-WGL:77.6 dBA / RM-WGS:77.6 dBA
Signal Processing
AEC, Noise Reduction, De-reverbration, AGC, PEQ, Output Gain Adjustment

Wireless Specifications

Radio Method
1.9 GHz DECT standard
Radio Frequency Range
USA, Canada: 1920.0 MHz - 1930.0 MHz / Japan: 1893.5 MHz - 1906.1 MHz / EU, Australia, New Zealand, Norway, UK: 1880.0 MHz - 1900.0 MHz
Maximum RF Power Level
USA, Canada: 23.5 dBm / Japan: 26.5 dBm / EU, Australia, New Zealand, Norway, Sweden, Finland, Denmark, UK: 26.5 dBm
Maximum Coverage Distance
50 m (depends on the usage environment)
Encryption
AES (256-bit)

RM-CR Input/Output Characteristics

Input Terminal
MIC IN 1,2 / AUX IN L,R
Input Level
Nominal -46dBu -14dBu / Max. before clip -26dBu +6dBV / Connector XLR-3-31 (Balanced)/ RCA PIN
Output Terminal
AUX OUT L,R / SP OUT L,R
Source Impedance
1kΩ
For Use with Nominal
10kΩ
Output Level
Nominal -14dBV / Max. before clip +6dBV / Connector RCA PIN

RM-CR General

Description
Signal Processor
Dimensions (WxDxH)
W215mm×D260×H44mm
Weight
1.6kg
Power requirements
PoE+(IEEE 802.3at, LLDP), DC 48V
Maximum Power Consumption
15.0W
In Operation
Temperature 0℃~40℃ / Humidity 30%~90% (No condensation)
Storage
Temperature -20℃~60℃ / Humidity 20%~90% (No condensation)
Indicator
・Power Indicator ・Status Indicator ・Bluetooth Indicator ・Network Port Indicator(x3)
Accessories
Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-microB) 1 m (3.3 ft), 4x Rubber foot, Access Panel
Mount
Table Mount, Rack Mount
Connector
RJ 45, USB, XLR balanced, RCA
Maximum Device with RM-CR
-
Options
RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit

RM-CR Network Specifications

Ether1
Dante Audio/Dante Control, Remote Control, WebUI, PoE+
Ether2/Ether3
Corporate Network, Remote Control, SIP, WebUI
USB Network (Front)
USB2.0, Network Class, WebUI, Fixed IP
Cable requirements
Ether1/2/3 : Cate 5e or higher (STP Recommended) USB Network : USB Cable (A-microB type)

RM-CR Audio Specifications

Frequency response
20Hz – 20kHz
Sampling Rate
48kHz
Bit depth
24bit
Latency
8 [ms] (Dante In to USB Out, includes signal processing)
Dante
16in x 16out
USB
USB2.0, Audio Class 1.0 Input: 2ch, Output: 2ch @48kHz
Mic Input
XLR balanced, Input 2ch
AUX
RCA unbalanced (Line Level), Input: 2ch, Output: 2ch
Speaker Out
RCA unbalanced (Line Level), Output: 2ch
Bluetooth
Version 4.2 Supported profiles: HFP(1.6), A2DP, AVRCP Supported codec: CVSD, SBC, mSBC Wireless output: Class2 Maximum communication distance: 10m (32.8 ft) (no obstacles) Radio frequency (operational frequency): 2,402 to 2,480 MHz Maximum output power (EIRP): 4.0 dBm (2.5 mW)
SIP
Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured) Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user Codecs G.711, G.722HD, G.729ab, G.726 DTMF Support RTP event, SIP in-band, SIP info package Security SRTP Support (RFC 1889), IETF SIP support (RFC 3261 and companion RFCs)

Resources & Support

Language:

Reviews

0 Customer Reviews

{{error}}
Thank you for reviewing this product!
Your review will be posted shortly.